blog 13 case study 5,6

Case study 5 

HALFTECTURE

  •  This work of architecture consists of a single flat steel sheet made of anticorrosive steel. 
  • Truss-shaped structural walls composed of 25mm-thick steel sheet have been set at the right and left ends, and a catenary curve made of 16mm- thick steel sheet spans the 20m gap between these support points.
 
  • Toilet booths have been set in the open space obtained below. The outer faces of the right and left walls, upon which the roof has been placed, and inclined toward each other, and during construction the shapes were fixed and joined after they had twisted and warped under the effects of gravity.





Case study 6

Artists’ Studios in Aberystwyth

  • The Artists’ Studios in Aberystwyth were intended to provide low-cost facilities for sixteen start-up arts organizations for the Aberystwyth Arts Centre, part of the University of Wales, Aberystwyth. 
  • In an effort to respect the character of the wooded site, the program was broken down into eight smaller studios and placed among the trees. 
  • The shed-like studio buildings have simple timber frames that are conceptually split down the middle and pulled apart to bring light and ventilation to the centerline, and then organized around a common entryway.




 
Reference : www.archdaily.com, www.heatherwick.com


HARIKRISHNAN A
 

Comments

Post a Comment

Popular posts from this blog

Steel Erection, Fabrication and Hybrid construction -Blog 16

Image
This blog is about how the steel sections are transported to the site, the issues involved with transportation, erection and fabrication along with the onsite constrains. TRANSPORTATION: The steel sections have to transported from the manufacturing site to the fabrication site and this becomes a tough task due to their size. Often large pieces cannot be transported in a single part, they are split or divided and shipped as two separate pieces or even as one piece to avoid damage or scratches. Temporary connections are made on the pieces to avoid damage and to keep the parts in place during transportation.     These parts are not transported in normal vehicles but require long trail vehicles to fit their length and size which again becomes a difficult task to turn around the corners of the road and at junctions     FABRICATION & ON SITE CONSTRAINS: Fabrication of steel on sites which are along the main road or at the corner site is very hectic as there is very...
Read more

BLOG-16 FABRICATION, ERECTION AND HYBRID STRUCTURES

Image
  FABRICATION: The process of  steel fabrication  involves grinding, welding, cutting, bending, drilling, punching, burning or melting and other general crafting methods using various high-quality tools and CNC equipment. ERECTION LIFTING, POSITIONING AND PLACING OF STEEL MEMBERS IN A STRUCTURE  Once the member(s) are lifted and placed in the required place, with the help of temporary supports and equipment, they are fastened and fixed, depending on the nature of connection.  Erections may be achieved by two techniques such as MEWP(Mobile Elevating Work Platforms) by Mobile crane and Tower cranes. HYBRID STRUCTURES Hybrid structures are structures built with composite materials a combination of different materials with steel. A common  hybrid system  consists of hollow core slabs together with steel or cast-in-situ concrete frames                       EXAMPLE STEEL WITH TIMBER     I...
Read more

STEEL , ALLOYS AND THEIR COMPARISON

Image
BLOG- 8                                     STEEL , ALLOYS AND THEIR COMPARISON                                                               STEEL AND ALLOYS                                               An alloy is a blend consisting of metal and other elements. Alloys are generally made for achieving properties like greater strength or resistance to corrosion. Steel is an alloy of iron. It mainly consists of iron with some small amounts of carbon. Definition ALLOY :      A homogeneous mixture of a metal with other types of elements                       ...
Read more